[Jethro23]

Received my optic plate for my new PDP and picked up a Burris Fast Fire 3 yesterday. The cutout in the slide is too short for the Burris to fit in there.
Any suggestions?

I realize this post is a little over a year old but I thought I would ask. Were you ever able to get a plate for the Burris Fast Fire 3 for your Walther PDP? I am looking at the same optic and would like to know if Walther has the plate to send me for free or am I going to need to get from somewhere else? Also what is the mounting style that is used by the Burris Fast Fire 3?

 

[pani]

Morning all

I have a 2021 PDP and a shield RMS optic. German distributor claims the 04 plate for an RMR can with slight modifications accept the shield sight. Anyone tried this and how difficult is it?

Montageplatte Shield RMS/SMS

Buy online within EU WALTHER Mount for red dots Montageplatte Shield RMS/SMS ✓ Over 10,000 products ✓ Gunsmith ✓ Since 1915 in Berlin

sportwaffen-triebel.de

 

[pani]

To answer my own question I bought a 04 adapter plate for the Leupold delta point pro. According to the profile dimensions I had to shorten the adapter plate posts a 0.5 mm and presto the pattern is the same. Pics for reference. Btw talk about sight cowitness.

 

[Juicehead2004]

I just bought a full Sz PDP from Buds gun shop online and was checking out the adapter plates from CHPWS, and was wondering how I tell if I have a 1.0 or a 2.0.. ?

 

[kbmcml]

I just bought a full Sz PDP from Buds gun shop online and was checking out the adapter plates from CHPWS, and was wondering how I tell if I have a 1.0 or a 2.0.. ?

What is the serial #? Gen 2 pistols start with FDL9203, FDM0001, and FDN3124. My recently bought PDP serial is FDOxxxx and it's Gen 2.

Alternately just take the optics cover off the slide (with a t10 Torx). If the optics cut is flat, it's a Gen 1. If it's milled like this then it's Gen 2...

When you receive and register the gun, you can fill out an on-line form and Walther will send you the optics plate of your choosing for free. Mine took just over a week to arrive.

 

[Juicehead2004]

What is the serial #? Gen 2 pistols start with FDL9203, FDM0001, and FDN3124. My recently bought PDP serial is FDOxxxx and it's Gen 2.

Alternately just take the optics cover off the slide (with a t10 Torx). If the optics cut is flat, it's a Gen 1. If it's milled like this then it's Gen 2...
View attachment 104855

When you receive and register the gun, you can fill out an on-line form and Walther will send you the optics plate of your choosing for free. Mine took just over a week to arrive.

Thank you very much. The gun should be ready for pickup in a few days so I’ll check it out then now that I know what to look for. Thanks again.. serial is FDH btw so prob a Gen 1..