Walther Forums banner

1 - 20 of 70 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter #1 (Edited)
Here is few of my videos on youTube . Review and installation of Meprlight and Trijicon night sights and short review of Viridian X5L 2nd generation tactical laser .
Excuse my accent :) it is going to stay with me till the rest of my life .Please check the last page for more ( latest videos)
Please check till the last page (there are some videos as well on the other pages ((not listed on the first page))of this thread )
P.S.To view those videos in better video quality watch them directly on youtube.
P.P.S. Guys please subscribe to my new (my first ) channel on you tube ,please leave a feed back .Thank you. ROTANIMRET X

New videos: Size comparison between stock sights vs Meprolight night sights vs Trijicon night sights . How to install Viridian X5L 2nd gen Laser/Light to Walther PPQ

New update(12/09/12):

New Update (03/22/13)


http://www.youtube.com/playlist?list=PLU_xQ8KFZdL-M7Sen_Iu6GFQsXcXA-2Eq
 

·
Registered
Joined
·
3,335 Posts
This will no doubt be utilized by many PPQ owners.

Cheers on quality work and some great contributions to the community :cool:
 

·
Registered
Joined
·
25 Posts
Thanks for doing these! It looks like the Trijicons have a deeper rear sight notch which is what I'm looking for. Compared to the stock sights, would you say that the Trijicons have more or less light between the front blade and the rear notch? The rear notch is too wide on the PPQ for me right now.
 

·
Registered
Joined
·
92 Posts
Discussion Starter #7
I am going to record another video ( tonight or tomorrow ) where I am going to measure all 3 sights ( in millimeters for precision).And we are going to find out about those openings . Also I am planing to record more detailed video on Viridian X5L 2nd gen laser sight , I'll show how to install it . So stay tuned , or better yet subscribe to my channel on YouTube . Thank you.
 

·
Premium Member
Joined
·
8,562 Posts
I thought you did a fine job on the videos with one exception, a number of times you had your finger in the trigger guard and/or on the trigger.
While I'm positive your weapon was safed, you might want to consider being a good role model for others by using proper firearm handling technique.
That being said, I'm looking foreward to more videos from you Me2.
 

·
Registered
Joined
·
92 Posts
Discussion Starter #9 (Edited)
Thank you for constructive criticism .I will include safety check and apply safe fire arm handling techniques in to my future videos .Also feel free to give me advice on how to improve my videos. Thanks again guys .
 

·
Registered
Joined
·
92 Posts
Discussion Starter #12
And here is another video. in this video you can learn how to install Viridian X5L tactical laser sight/light and how to operate and adjust that sight.
 

·
Registered
Joined
·
92 Posts
Discussion Starter #13 (Edited)
Message to moderators : I would like to change the name of this thread to "Video reviews and installation guide to Walther PPQ sights/laser/light " .Or if anyone has a better thread name please share.Thanks.
 

·
Registered
Joined
·
92 Posts
Discussion Starter #15
No problem. The funny thing is that those sights looks significantly bigger/smaller compare to each other but in reality they practically the same size. I guess the shape of the sights creates an illusion of them being bigger or smaller compare to each other, but the actual difference (on average) is only 0.5-1.5mm . Before I measured them I was absolutely positive that the stock sights are the smallest out of 3, but they turned out to be about the same size(front sight is actually 0.5mm bigger(higher) than Meprolight front sight).
 

·
Registered
Joined
·
5 Posts
Front sight tools and Trijicon WP01Y

I was able to use the 1.3mm Allen wrench that came with my Viridian C5L to remove the original factory sights (polymer).

And I was happy to find a 3/16 hex nut driver on eBay for only $12.99 (free shipping).

Glock Front Sight Tool 3 16 Precision Nut Driver | eBay

Described as "Glock Front Sight Tool 3/16 Precision Nut Driver" (which is compatible with the PPQ, and I assume with the P99). Very fast shipping. The tool worked perfectly to install my new Trijicon night sights. And it's good quality, with a rubberized grip and free-turning end to rest in your palm for stability. The seller was ajgutty.

The front sight was threaded in the standard: left to loose, right to tight. But the rear windage screw is reverse threaded: right to loose, left to tight.

Thank you to ROTANIMRET X for his
.

I just took the post-op PPQ to the dark bathroom for a test glow. They look fantastic! I chose model WP01Y with front green and rear yellow. The price on Amazon was $114.75. Ordered on the 14th, received on the 16th (because I have Amazon Prime free 2-day shipping). Very happy with them.
 

·
Registered
Joined
·
3,335 Posts
Don't own a PPS, but does the Meprolight 18802 (made for PPS) have the same componenets as the PPQ Meps?
 

·
Registered
Joined
·
92 Posts
Discussion Starter #19
Trijicon is obviously loosing money for not making those tools :) . Congrats on your new upgrades .
 

·
Registered
Joined
·
3,335 Posts
Straight from the video...

Trijicon (L) and Meprolight (R)
 

Attachments

1 - 20 of 70 Posts
Top