Walther Forums banner
1 - 2 of 2 Posts

·
Super Moderator
Joined
·
7,738 Posts
Redcat, that is interesting.
My understanding of aperture sights, on carbines, is that the eye will naturally center itself on the center (brightest) part of the aperture. A cheek weld, on the stock, is necessary to discourage moving your eye, relative to the aperture. Done correctly, the eye itself actually becomes the rear sight; then just put the front sight were you want the bullet to go. Personal fan of 'peep' sights, on black rifles or '92 Winchesters, because they are accurate, and they let codgers shoot irons. The front sight/target are both far enough away to allow a decent focus.
On a handgun, well....there is no cheek weld, and the sight is at arms length (my sergeant wanted my nose to the charging handle on an M16; closer is better; you focus through the rear sight, not on it..) Lots of things can move, relative to the aperture, on a pistol.
So, in this case, the aperture would simply be used as a rear sight, presumably centering the front one as a sight picture. The question becomes, how well can you see/align the sights with this setup? It might work, but it won't function as a true aperture; the peep window, not your eye, will be the rear sight. And, with the short barrel of a handgun, it is doubtful that focus issues with the front sight will be solved.
Neat TPH; gotta say that aperture looks pretty high, relative to the slide. Nice, neat installation.
Let us know if it works.... ;)
Moon
ETA-Have handled the takedown Ruger 9mm carbines; presumably because of the takedown feature, Ruger has mounted an aperture out on the barrel, rather than the receiver. It actually gives a halfway decent sight picture, but it is still a carbine, and I didn't actually shoot it. Too, the sight radius is much shorter, from halfway down the barrel, compared to the full length of the barrel/receiver with a proper peep.
M
 

·
Super Moderator
Joined
·
7,738 Posts
After all that, it occurs to me...if a peep on a handgun worked really well, we'd have seen more of them, yes? ;)
Moon
 
1 - 2 of 2 Posts
Top