Thinking about my PPK/S
Iam thinking about selling my PPK/S It is a boreing pistol. It goes Bang every timeI pull the trigger. Never has a jam of any type. Feeds any ammo in 380 that Ive bought for it. And has not even 1 time since I have owned it bit me. Dam what a bore. I think I might get a S&W PPK/S maybe it will at least jam.
Only other choice I have is a KelTec and Im not really that far gone yet
Heres a thought NAA company has a 32NAA round. Its a 380case necked down to a 32bullet. CorBon makes the ammo. 60grHP at 1200fps and 192ftlbs from a 2.5" barrel
I know some barrels were made for the Russian pistols and that a few barrels were made for Kel Tec . From a PPK/S size pistol this round is in 9mm numbers for FPS and good engery.
I know this can be done. Because was already been done to a 380 KELTEC.
Buy a 380 barrel and a 32 barrel Have a machine shop open 380 barrell up as much as possible but don't touch the chamber.Cut 32 off at end of chamber. then turn barrel down only as much as needed to press fit inside of 380 barrell. this way all 380 still mates up and barrel should be strong enough. If you try to enlarge 32 chamber to 380 might be trouble also would require other parts like slide.
Just thinking as I don't Bake my Pistols in oven and Iam bored
All this because I went out and fired last box of Russian Brown Bear. This ammo has no recoil and I hit water jug 4 times before a HP appeared to open (Jug moved) other wise just leaking water. Not on my best buy list fot shooting or SD.
___
Iam thinking about selling my PPK/S It is a boreing pistol. It goes Bang every timeI pull the trigger. Never has a jam of any type. Feeds any ammo in 380 that Ive bought for it. And has not even 1 time since I have owned it bit me. Dam what a bore. I think I might get a S&W PPK/S maybe it will at least jam.
Only other choice I have is a KelTec and Im not really that far gone yet
Heres a thought NAA company has a 32NAA round. Its a 380case necked down to a 32bullet. CorBon makes the ammo. 60grHP at 1200fps and 192ftlbs from a 2.5" barrel
I know some barrels were made for the Russian pistols and that a few barrels were made for Kel Tec . From a PPK/S size pistol this round is in 9mm numbers for FPS and good engery.
I know this can be done. Because was already been done to a 380 KELTEC.
Buy a 380 barrel and a 32 barrel Have a machine shop open 380 barrell up as much as possible but don't touch the chamber.Cut 32 off at end of chamber. then turn barrel down only as much as needed to press fit inside of 380 barrell. this way all 380 still mates up and barrel should be strong enough. If you try to enlarge 32 chamber to 380 might be trouble also would require other parts like slide.
Just thinking as I don't Bake my Pistols in oven and Iam bored
All this because I went out and fired last box of Russian Brown Bear. This ammo has no recoil and I hit water jug 4 times before a HP appeared to open (Jug moved) other wise just leaking water. Not on my best buy list fot shooting or SD.
___
