Walther Forums banner

1 - 19 of 19 Posts

·
Registered
Joined
·
140 Posts
Discussion Starter #1 (Edited)
this needs to be a sticky, not sure why the other thread is a sticky when the info is 6 pages in and not the first post

got some of the info from PPQ FTW

Walther:
9mm - WAF76000 - 10rd , WAF76001 - 15rd , WAF76002 - 17rd
40 cal - WAF77001 - 10rd , WAF77002 - 12rd , WAF 77003 - 14rd

P99 mags: New (red) or Old (blue -with modifications)
9mm - WAF65000 - 10rd , WAF65004 - 15rd
40 cal - WAF66000 - 10rd , WAF66001 - 12rd

Mag Research Baby Desert Eagle "Fast Action"
9mm - MAGFA915 - 15rd , MAGFA910 - 10rd
40 cal - MAGFA4010 - 10rd , MAGFA4011 - 11rd

Pro Mag
9mm - SMI-17 - 10rd , WAL-04 - 10rd , WAL-A2 - 15rd , WAL-A5 - 20rd , WAL-A9 - 32rd
40 cal - WAL-05 - 10rd ,


enjoy
 

·
Registered
Joined
·
140 Posts
Discussion Starter #3 (Edited)
that is because its a S&W part # not Walthers.

only way youd find out is to buy one and see

and if it is the same you have to modify it
 

·
Registered
Joined
·
17 Posts
The .40 cal MAGFA4011 is actually 11 rounds not 12. Thought I would mention it for the sake of acuracy. The front lip needs to be modified as well for safe and proper clearance of the feed ramp.
 

·
Registered
Joined
·
3 Posts
Mag P99 9mm Luger 15-Round Steel Blue

I want to know if the mags listed above as Walther #: 2681226
are the same as the new p99 mags WAF65004
that 2681226 shows up in the walther parts diagram for the 9mm p99 AS. but there is no mention of the WAF numbers seen in the mag thread.
Hey all, a follow up to this. the mags in the above link DO work in the PPQ. they seem to come with gray followers though. I just got a couple of them delivered yesterday, and had the gf test the mags out since im away at the moment. They lock back the slide when empty, they fall free from the gun when mag release is pressed (tested empty) with no help and clearance between mag and feed ramp looks good. when compared to the PPQ factory mags, they are pretty much identical (in the areas that matter). Havent done range testing yet. hope this helps :)
 

·
Registered
Joined
·
19 Posts
I know some will stick their nose up at this but we have to include WAL-A2. Which is the pro mag number for the p99 mag..
I ordered and received (2) of the ProMag WAL-A2's for my PPQ. Unfortunately 1 of the 2 mags would consistently lock the slide back after the second to last round was fired (leaving the last round in the mag). The other mag worked just fine, no issues at all. No (other) issues with these mags though. Will be range mags only.

I have now ordered/received 2 Baby Eagle mags to try out.
 

·
Registered
Joined
·
30 Posts
I just ordered two mags from Cheaper than dirt. I don't really like that place, but they had them in stock. I asked about the follower in the pic being black and was told that it was a stock photo and not to worry about it. Here is a link. I hope I got the right one. Their needed for a competition next week. I have not ordered from them since before the last election when they jacked up the price of P-Mags to $50.00 to gouge people........

2-MGWAF76001 - Walther PPQ Magazine 9mm Luger 15 Rounds Anti Friction Coating Black
 

·
Registered
Joined
·
10 Posts
Just ordered 2 of the MAGFA915 from Magnum Research, $31.99 each for a total of $70.29 with shipping. Tried to find some locally but no one has either the Walther or other mags, probably would have been more expensive anyway.
Thanks Ops for posting the mag numbers. As soon as I'm able to try them out I'll post here again to put another notch in the stock and say "Yup .. these work great for the PPQ."
 

·
Registered
Joined
·
40 Posts
I just received my order of (2) 10rd Magnium Research mags. Definately doesn't look at nice as the factory ones but at half the price I'm not going to complain.

Anybody tried the promags? I know from experience their AR15 mags suck.
 

·
Registered
Joined
·
32 Posts
Anyone tried these for sure?

The Pro-Mag WAL-A2

They are in the list of mags that work fine, but when i look them up at this link, they all say "blue" after them. I don't know if they're refering to the follower or the gun color (blued). I cant find any "red" ones, if thats even what I'm supposed to look for.

2-MGPMWAL-A2 - ProMag Walther P99 Magazine 9mm 15 Round Blue

I don't want to have to modify anything, I just want it to work. Let me know, Thanks!

Medic
 

·
Premium Member
Joined
·
13,556 Posts
The Pro-Mag WAL-A2

They are in the list of mags that work fine, but when i look them up at this link, they all say "blue" after them. I don't know if they're refering to the follower or the gun color (blued). I cant find any "red" ones, if thats even what I'm supposed to look for.

2-MGPMWAL-A2 - ProMag Walther P99 Magazine 9mm 15 Round Blue

I don't want to have to modify anything, I just want it to work. Let me know, Thanks!

Medic
I've always been a believer in 'you get what you pay for'....and for $17 bucks, I just can't believe this mag is of the same quality as a factory original. I know the originals cost about 50 bucks, but when the SHTF which one do you really want in your gun.

Here's a review of the promag from the CTD web site: Bought the Walther ProMag P99 / SW99 9mm (15) round mag for my Walther PPQ. There is an online video showing this mag working, so I thought I would give it a shot. The mag does in fact work in the PPQ and cycles through just fine. However, in the course of 60 rounds (4 mags worth), there were 3 instances when the last round would not chamber, and the slide would lock in the open position as if it was out of ammo. I then ran both the factory mags that come with the PPQ with no issues. This is a fine mag for target work, but I will need to put many more rounds through these to determine the cause of the 3 failures to feed I experienced with two different ProMags in the PPQ.
 

·
Registered
Joined
·
172 Posts
this needs to be a sticky, not sure why the other thread is a sticky when the info is 6 pages in and not the first post

got some of the info from PPQ FTW

Walther:
9mm - WAF76000 - 10rd , WAF76001 - 15rd , WAF76002 - 17rd
40 cal - WAF77001 - 10rd , WAF77002 - 12rd , WAF 77003 - 14rd

P99 mags: New (red) or Old (blue -with modifications)
9mm - WAF65000 - 10rd , WAF65004 - 15rd
40 cal - WAF66000 - 10rd , WAF66001 - 12rd

Mag Research Baby Desert Eagle "Fast Action"
9mm - MAGFA915 - 15rd , MAGFA910 - 10rd
40 cal - MAGFA4010 - 10rd , MAGFA4011 - 11rd

Pro Mag
9mm - SMI-17 - 10rd , WAL-04 - 10rd , WAL-A2 - 15rd , WAL-A5 - 20rd , WAL-A9 - 32rd
40 cal - WAL-05 - 10rd ,


enjoy
As magazines purchased used or without packaging will not have the part numbers, it is important to note the following:

PPQ magazines will work in the P99. The reverse is true only if the P99 magazine is the most recent version, which as I understand it, has visible differences in the magazine tubes as follows:

1. The rear of the LEFT feed lip will have the ejector relief cut so that there is sufficient clearance between the left feed lip and the ejector so that the ejector is not damaged or snapped off by repeated forceful magazine insertions.

2. The front wall of the magazine tube is LOWER than the earlier P99 magazines so that the front wall of the magazine tube will not hit the bottom of the feed ramp in the PPQ causing damage to the feed ramp.

Others may want to chime in with written descriptions of the differences so that a purchaser can tell upon inspection if the magazine is correct.
 

·
Registered
Joined
·
2 Posts
So will S&W marked Walther P99 magazines w. red followers work? I just ordered a new pair of 40 S&W 10 rounders off of eBay but they did not list a Part#. Not even sure if S&W will list the same Part# as Walther or what that S&W # is if they did. Anyone know???
 

·
Registered
Joined
·
70 Posts
this needs to be a sticky, not sure why the other thread is a sticky when the info is 6 pages in and not the first post

got some of the info from PPQ FTW

Walther:
9mm - WAF76000 - 10rd , WAF76001 - 15rd , WAF76002 - 17rd
40 cal - WAF77001 - 10rd , WAF77002 - 12rd , WAF 77003 - 14rd

P99 mags: New (red) or Old (blue -with modifications)
9mm - WAF65000 - 10rd , WAF65004 - 15rd
40 cal - WAF66000 - 10rd , WAF66001 - 12rd

Mag Research Baby Desert Eagle "Fast Action"
9mm - MAGFA915 - 15rd , MAGFA910 - 10rd
40 cal - MAGFA4010 - 10rd , MAGFA4011 - 11rd

Pro Mag
9mm - SMI-17 - 10rd , WAL-04 - 10rd , WAL-A2 - 15rd , WAL-A5 - 20rd , WAL-A9 - 32rd
40 cal - WAL-05 - 10rd ,


enjoy
The OP needs to update this to say PPQ Classic only, or add a section for M2 pistols. People are getting confused now..
 
1 - 19 of 19 Posts
Top