Walther Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
358 Posts
Discussion Starter · #1 ·
Well I had a long day of shooting and something interesting happened.

Everything was fine untill I took it apart. Then all of a sudden it wouldnt go back together.

The little hook shaped device on the left side was preventing the slide from moving back. It was fixed by gently pulling back and pushing down. The gun shot fine but needless to say it went back to Walther for fixing.
 

· Registered
Joined
·
358 Posts
Discussion Starter · #4 ·
OK behind the ejector rod, on the left side is a little L shaped piece of metal. It is right behind the pointed portion that sticks up. The lower side of the L sits toward the front of your firearm. I took pictures but they are blurred all to hell. Also walther has my guns.
 

· Registered
Joined
·
358 Posts
Discussion Starter · #7 ·
Well I got it back with a letter. Nothings wrong. I took it apart and it still kind of hangs up. Although not as bad. Its still jams up and thats upseting. I am going to call them back and bitch like a 2 yearold whos not getting what he wants.
 

· Registered
Joined
·
358 Posts
Discussion Starter · #9 ·
The smith said he had to bang it on. I think maybe the rails are messed up. Can I get you to do something for me. The little L shapped piece, can you measure how far above the frame its sits when its fully forward. If the smith can figure it out maybe the walther forum can.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top