Walther Forums banner

P99 QA striker spring range report

1893 Views 12 Replies 8 Participants Last post by  onebigcubano
I just want to report my first FTFire since I took six coils off of my striker spring a couple of months ago. I was doing some 25 yard work with my 9mm QA today, using Winchester White box. It was very windy, about 15 mph, and still was able to group in the 4 to 6" range, this is just an awsome firearm!!! Since I was doing careful aiming I was pulling the trigger slowly and had one round out of 100 that failed to fire. I inspected it and there was a primer strike, put it in again and with another slow pull of the trigger, failed again. I recocked and snap pulled the trigger and it fired. This is the first failure in about 400 rounds since I did the modification. Otherwise my QA has been flawless out of the box both before and after the removal of the coils. Thought this might be of interest to those who have and are considering removing coils from their striker spring, happy shooting
See less See more
1 - 1 of 13 Posts
Problem solved.

I also agree...even as a noobie shooter my first IDPA match I didn't even notice the first long, hard pull nor did I notice the DA to SA transition from the first to the second shot.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.