NewB
Join the discussion
Recommended Reading
-
PPS Suppressor Operation
FAQ: PPSWhile waiting for my approval for a suppressor and having my barrel sent out to be extended and threaded, my question is will my choice of suppressor require a nielsen device for proper operation.- 2
- 109
-
[email protected] · updated
-
PPS M2 issues
FAQ: PPSI purchased a PPS M2 back in January. I cleaned and lubed it and took to the range. I fired 127 rounds of various ammunition. I had 5 failures. 3 fail to ejects and 2 fail to load. The ones that wouldn’t load were hollow points. I am thinking that the edges were getting hung up in the gap of...- 4
- 192
-
Is the PPS being abandoned?
FAQ: PPSI keep seeing low prices of $279 or $299 from a few different vendors (in Ohio)...has Walther given up on this pistol?- 30
- 2K
-
PPS M2 extended magazine disassembly
FAQ: PPSHello, I read the owners manual on how to disassemble the extended magazine (medium or large floorplate) for the PPS M2. The first step is to use a small screwdriver and lift the Dust Cover's left and second its right front end gently a little bit (0.04") off the floorplate. Next it says lift...- 1
- 1K
-
Walther PPS M2 peening barrel
FAQ: PPSHello, Last week I purchased a Walther PPS M2.* So far I shot a total of 100 rounds through it.* After cleaning my Walther PPS M2 I noticed there was a peening mark on the right side of the barrel near the feed ramp.* Is this normal? *Is this going to damage my gun? Will I need to sent it out...- 2
- 904
Join now to ask and comment!