Walther Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
132 Posts
Hi, nice looking example and this is a second generation model (the decorated grip washers are from this generation), 1924 - 1934 circa 100K production. The Mod 9 was in series from 1921 - 1945 covering all the various model updates. The serial No. would indicate some minor production upgrades e.g. longer firing pin, S/No. on RHS, grips with chequered finish and large Walther logo to each side. Mechanically this combines the firing mech from the Mod 1 with the Mod 8 take down features. When cocked the rear of the striker protrudes through the rear face of the slide, this indicates the firearm is cocked whether loaded or not! There were upgrade available at the time to include Gold and Silver plate, with pearl or ivory grips. Engraved versions were also available - at cost! I have no knowledge of the holster, maybe this was specifically made?
 

·
Registered
Joined
·
132 Posts
A.F. Stoeger Co in the US offered the standard blue finish as a model 9a which should be marked to the LHS on the slide. The gold plated version was listed as the Model 9b. Gold and silver plated screw heads were also available. Nickle plate was available wit the pearl or ivory grips which could either be plain or engraved finish. The pistol combines the firing mech of the mod 1 with some of the mod 8's take down features - small correction thanks. Attached my Mod 9, Nickle plate...
 

Attachments

1 - 3 of 3 Posts
Top