Walther Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Late 80’s ppk. Recently it will not recock when firing. Ejects and feeds fine. Runs s/a fine. Cleaned , lubed and have tried various ammo. Thought I’d try a wolfs recoil spring. Is 20# the the stock spring weight for this older model? Is recoil spring the likely problem?
William
 

·
Registered
Joined
·
29 Posts
I would replace the hammer block spring and try that. Had the same thing happen to me with a ‘65 PP and when I replaced the hammer block spring it ran fine.
 
1 - 3 of 3 Posts
Top