You guys have to be careful using these aftermarket barrels in your P-99's
If they are not properly fitted as some have mentioned, you could do irreversable damage to the weapon's slide.
The barrel should slide back and forth inside the slide without any binding at the front of the slide- whatsoever. Make this test with the pistol taken apart.
Then put the pistol back together.....and ease the slide forward about 1/2 inch from fully closed.......then let the slide go. It should come into full battery and not need any assistance to close tightly.
If a weapon doesn't return to full battery ....... I would be very careful in firing it.
JF.
If they are not properly fitted as some have mentioned, you could do irreversable damage to the weapon's slide.
The barrel should slide back and forth inside the slide without any binding at the front of the slide- whatsoever. Make this test with the pistol taken apart.
Then put the pistol back together.....and ease the slide forward about 1/2 inch from fully closed.......then let the slide go. It should come into full battery and not need any assistance to close tightly.
If a weapon doesn't return to full battery ....... I would be very careful in firing it.
JF.