Walther Forums banner

slide

  1. My new CCP M.2 9mm jams

    CCP
    I just received a new CCP M.2 9mm the other day and took it to the range to break it in. After about 20 or so rounds of "9mm Luger 115 Grain FMJ Target Range - Winchester - USA9W," the gun started jamming. Specifically, the slide would not return to battery, and instead would stop about 1/4 of...
  2. Slide interchangeability between new M1 and M2

    PPQ
    I know this has been discussed before, specifically here https://www.waltherforums.com/forum/p99/62834-threaded-ppq-barrel-p99.html but the post was a bit confusing. I'd like to snag an M1 and slap the Q4 Tac slide on the M1 frame. I'm also interested in swapping the M1 non threaded barrel...
  3. Q4 Slide for sale?

    PPQ
    Couldn't find any outlets selling the slide by itself. Wondering if anyone knows where I can snag a Q4 Slide to slap on a regular PPQ?
  4. Walther PPK number on slide.

    PP and TP Series
    Can someone help me identify the history of my PPK? There's a series of numbers on the right side of the slide that reads: 1/59 12-120-0890. I have searched the web and even reached out to Earl. Earl basically told me he's never seen anything like this. Any help will be appreciated.
  5. PPQ M2 4 inch 9mm slide

    PPQ
    I want to buy an additional slide for my PPQ. Where can I find one?
  6. PPK/S .22LR Slide Stuck

    PPK/S .22LR, New Production by Umarex, 2013+
    Ok as the subject states my slide is stuck. I was just toying around (for lack of a better word) getting familiar with my new PPK. While following the manual I was field stripping my gun to better familiarize myself with the weapon before taking it to the range. I following the instructions on...
  7. Pk380 frozen/stuck after reassembly

    PK380
    Not sure what happened but...I cleaned my pk380 last night and put everything back together as I have many many times before. Except this time after I put it back together the slide will not move. I cannot rack it back and I can't even take it back apart as it will not move at all...it's lubed...
  8. P22 parts?

    P22
    Hi. I'm new to the forum & am hoping that someone here may be able to help me locate a replacement slide for my p22? Any help would be greatly appreciated. Thanks -
  9. WTS: Even swap of a *new* PPX stainless slide for a *new* PPX black slide

    Trading Post / Parts Bin
    Gun sold Never mind the slide swap. I found a buyer for the gun & I'm ordering a new SD one.
  10. WTB: PPQ 5" complete slide only...no frame

    Want To Buy
    Really looking to find a complete 5" slide to put on my M1 frame. Can't find one anywhere. Please help!!!
  11. Rust on P99 Slide

    P99
    Rust started developing on my P99 slide about a year ago. I now keep it well oiled in a moisture free environment. Anyone know how to get rid of the rust and re-finish the slide so it is not that apparent anymore? Help appreciated.
  12. P99 slide stuck after reassembly

    P99
    Hi all! I have a P99 that I don't shoot often enough. It has probably fewer than 600 rounds through it. I removed the slide, recoil string, and barrel to see if it needed cleaning before shooting this weekend, and when I reassembled it I must have screwed something up. It won't fully go back...
  13. PPK/S-1 (S&W) Slide Fails To Return Full Forward

    PP and TP Series
    Hello All, New forum member here, and a new shooter. Hope each of you are well! So, I recently purchased a brand new PPK/S-1 380 ACP and have had some teething pains with it. I was hoping that by a bit of collective knowledge dispersal from you folks so I might be able to develop a good...
  14. "Sticky" slide?

    PPX
    Is the slide typically "sticky" on a new PPX? What I am experiencing is, the slide "settles" into any position and will stay in that place, requiring extra effort to move. Also my barrel has distinctive tooling marks on the outer surface that make a "zipper" like sound when the slide is worked...
  15. P-38 Slide Sticks

    The Classics
    My 1973 Polizei P-38 recently developed a problem where the slide sticks in the aft (rearward) position (with no magazine in). I am forced to push the slide forward with a slight nudge from my palm. It is clean and well lubricated. Does anyone have any ideas as to how I might fix this problem?
  16. Slide won't close

    PPS
    I am new to all this so bare with me. I have a PPS - 300-400 rounds thru it. I clean it each time and have never had an issue putting all back together. This time however I cannot get the slide to rack back all the way. I think it is the Trigger assembly getting caught up on the striker...
  17. PK380 shakes when hammer is back?

    PK380
    I purchased a PK380 about 8 months ago and last night while i was cleaning it, i think i might of run into a problem but i'm not sure. I know a lot about firearms, but i am no expert on PK380's so i thought i would ask the community. Any advice or information is appreciated. My problem is after...
  18. Magazine with notch

    PK380
    Slide Lock Lever Not Activating I bought a PK380 and my slide is not staying locked back like every other PK380 I find a video of on the Internet. I searched on here but can't seem to locate an answer or clarification. Are there 2 types of magazines. Those that engage the slide lock lever...
  19. Slide stop problems.

    PPS
    I just got the pps in 40cal. i have put 300-350 rds in thru it and at about 300 the slide would always lock back on me. i cleaned it and have also gone down in the gran from 185 to 155. the 155 didnt do it as much as the 185 did but still sucks if i had to really defend myself. anyone know what...
  20. PPS Field Strip Problem

    PPS
    I just bought a brand new PPS .40 this weekend, and when I went to field strip and clean it for the first time exactly how the manual describes. I tried putting it back together and it just won't! When I go to put the slide back on it stops about an inch before reaching the back of the gun...
Top