Walther Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 19 Results
  1. PP and TP Series
    Looking for Walter ppk, decocker/ejector replacement in KC area
  2. PPS
    Is anyone else experiencing problems with Walthers Recall. I have been trying to access the FEDEX label with success since the notice came out.
  3. FAQ: PP/TP
    Hi Y'all. New user, long time reader. So I recently acquired a Pre WWII Walther PP Zella-Mehlis (Thur) chambered in 7.65 mm (AKA .32 acp). I'm guessing it was manufactured sometime during 1938, Serial #:107XXX P). It had the standard Crown/N on the right side of the frame and right above it on...
  4. PK380 and PD380
    I recently purchased a used PK 380 on a Gun Auction site (if I am allowed to post links to other sites I will do that later, Some gun boards seem to be very touchy about links). It was advertised as: Needless to say, that is not what I got. I work out of state so a few months have passed...
  5. P99
    I stumbled across this old thread and thought this was super cool: http://www.waltherforums.com/forum/p99/25629-very-rare-p99-south-africa-police.html Does anyone know if any of these models were ever imported to the United States?
  6. The Classics
    I just got my first P38 this past weekend, an AC42, all matching numbers except the magazine, it didn't have a serial number, it has a little pitting along the slide on the right side & at the muzzle, brown grips in great shape, no cracking or chips & no import markings anywhere. The inside was...
  7. Gun Matches and Shooting Competitions
    I'm getting ready to shoot my first USPSA match with a PPQ, and I'm not clear on the proper ready condition. The PPQ striker is fully loaded once you put a round in the chamber, and pulling the trigger only causes a single action: it just makes the striker fall. So the gun is a single-action...
  8. CCP
    My son experienced several malfunctions today with his CCP with the weapon having less than 200 rounds fired through it. A shell casing partially ejected and the magazine dropped out of the weapon. I took the weapon and cleared the partially ejected casing. I then observed the lever for the...
  9. PPS
    Hi All - New here to the forums and brand new user of Walther Firearms. I read a ton of reviews and have yet to find many bad things about the PPS or Walther in general. I took this research and put it toward the decision of buying my first Walther PPS 9mm Thursday from Gander Mountain. Today...
  10. PP and TP Series
    I'm brand new to Walther and to this forum. (I've been using the forums to learn.) I just picked up my first Walther: It's an Interarms PPK 380 blued. Based on the sticky note about Interarms production dates, it was built sometime between 4-94 and 11-94. It appears in good condition, and...
  11. Walther Rifles
    Hello everyone, I'm not quite sure where to post this, but I am looking for a rather obscure part. I have a Walther Model B but it is missing the safety. If anyone has a model B that they would like to sell, or at the very least take pictures of the safety so I replicate it, I would be extremely...
  12. Walther Rifles
    Hi everyone, I've bought a nice little KKJ, single trigger model with a 5 rounds magazine. Works nice. I decide to clean it up and ended taking it totally apart. Simple and smooth. Except for the safety button. On the KKJ model it appears that the safety is operated by quite a large clutch that...
  13. PP and TP Series
    I'm new to the forum, so I apologize if I am not asking this in the correct venue. Has anyone had an issue with the decocking lever on an Interarms PPK/S .380 inadvertently going on safe and dropping the hammer after 4-5 mags of quality FMJ ammo? I've shot a few thousand rounds [so far]...
  14. PP and TP Series
    I have obtained a 7.65mm C/N Walther PPK serial number 858,791 (1935) with a 60 degree safety; both the frame and slide are high polish and appear matched. The condition of the pistol is about 97%; the ramp, chamber and bore suggest little/no use and the trigger guard shows a distinct patch of...
  15. PPS
    Is it legal and possible to remove the trigger safety from a PPS? That protruding center piece is a constant irritation. It would be nice to transplant an M&P trigger safety, but....
  16. The Classics
    Hey, guys. First time poster, so hoping to pick up a bit of advice from those in the know. I have a 1977 production Walther P1 that's beginning to show an occasional issue. After about four or five rounds, the manual safety will begin to "walk" downwards under recoil. At that point, there's...
  17. P22
    I have a Walther P22 that my daughter and I shoot pretty often. My last 2 trips to the range with it led to an issue. After every round I shot, the safety lever would drop down engaging the safety.:confused: WHY? I couldn't figure it out, and I still can't. I tried to tighten the screws on the...
1-17 of 19 Results
Top