Walther Forums banner

p99

  1. P99
    If I recall correctly, a PPQ m2 threaded barrel fits the second gen P99? I had a PPQ m2 navy and I remember throwing the barrel in the P99 and it seemed to fit perfectly however I never shot it in the configuration. I’ve since sold the PPQ and still have the P99 and want to throw a threaded...
  2. Want To Buy
    As the title describes, I'm looking for a 2000's era P99 (non AS) with a matching Walter BA5/BA6 laser module. I realize these are a bit rare and hard to come by, so I am open to discussion about price. If it's a two-tone P99 that would be incredible but beggars can't be choosers!
  3. P99
    If not, I can get them from the Walther store for $42.00 ProMag offers magazines for $21-ish, but I've heard mixed things about their quality and reliability.
  4. P99
    I am on the hunt to learn more about the possibility of putting a flat trigger on the Walther P99. I have a PPQ Q4 Tac which i enjoy greatly, and specifically the flat APEX trigger, which I put on this PPQ. While I realize an APEX trigger will not fit the P99, has anyone on the forum tried to...
  5. Walther General Discussions
    Hope this is the appropriate sub forum for such a posting...I know in my case I only considered buying a Walther, both because of the Bond connection AND Walther’s history AND Walther’s build quality. https://screenrant.com/james-bond-movies-no-walther-ppk-gun-reason/
  6. P99
    Hi, all! First post here. Just got my first Walther, a like-new P99AS (circa 2014 model, 50 rounds through it) and am looking into holsters for it. I found the Alien Gear Shapeshifter and am interested in it, but according to their site, it's only for the PPQ. Now, having gotten real familiar...
  7. PP and TP Series
    Does anyone have any recent (last 5 years or so) experience with an Earl's Repair Service trigger job for the P99 AS? I am curious what can be done to a P99 anti-stress trigger to lighten both the double action pull, as well as the single action? Any success stories (or failures) out there...
  8. Want To Buy
    Hello! I am interested in buying one of the 9mm P99 AS models with an extended and ambidextrous slide release. If I believe they were Gen. 2-ish and I've seen them referred to as the "Defense Kit" in some forums. PM me if you know where I can find one of these and/or have one and would be...
  9. P99
    My P99 AS is at just over 9000 rounds, and I've just noticed that in DA or AS mode the trigger shoe has enough play to move forward maybe 2 to 3 millimeters off of the trigger itself, enough to expose the bottom part of the trigger (the long, thin "lollipop" shaped part, for lack of better...
  10. P99
    Hello All, This is my first post on these forums, and I'm looking forward to learning a lot about the P99. I thought I would post this question on here, because I can't seem to find any hard details on my P99. I just picked it up yesterday, and its chambered in .40 S&W. There is the eagle...
  11. P99
    Hey everyone, new here. I own a p99as and p99cas for about 6ish years. Don't need anything else, as I think I've made great purchases, can't say enough good things about these pistols. I do like all the German guns, and would love a 226 or p30, but I'm probably buying a long gun before I buy...
  12. Walther General Discussions
    I know this is probably the most-addressed issue on the forum, but I haven't found what I need using searches. I'm wondering if anyone can confirm that the height of the Meprolight PPQ/P99 rear sight is in fact 0.335". We've been messing with my wife's PPQ, since the Mep set number 18801 didn't...
  13. Trading Post / Parts Bin
    I have a NIB Walther P99 40 DAO for sale for $550. This was a gift from my wife but I need to fund for a Barrett REC7. Everything that came with the box goes too! Buyer pays shipping and handling + FFL fees but I would prefer a FTF in the Dallas/Fort Worth area. This is the hard to find DAO...
  14. Want To Buy
    Please DM if you have one for sale or know of a source.
  15. Want To Buy
    I am interested in buying a P99 with a manual safety, like this: http://www.waltherforums.com/forum/p99/25629-very-rare-p99-south-africa-police.html Thanks! Mike
  16. P99
    I stumbled across this old thread and thought this was super cool: http://www.waltherforums.com/forum/p99/25629-very-rare-p99-south-africa-police.html Does anyone know if any of these models were ever imported to the United States?
  17. Trading Post / Parts Bin
    16 round mag Fits P99C perfectly w/ grip sleeve, and many others. I have two (2) NEW in wrapper OEM Walther 16 round magazines (stamped Mec-Gar "made in Italy") with Walther factory logo and trademark. These magazines have been out of production for years, and are NEW, and sealed in wrapper with...
  18. Trading Post / Parts Bin
    I'm interested in buying a rail adapter for the Gen. 1 P99, preferably one of the originals with Walther branding. Willing to pay <$46. Thanks! Mike
  19. Want To Buy
    Looking to buy a P99 Gen. 1 Rail Adapter. Alternatively, if anyone knows where to buy one, please let me know. Thanks!
  20. P99
    Hi people, Here, my Christmas gift to you (I hope you find it is worhty as a gift, anyway). It is a "Do It Yourself" template for Talon Grip raw material sheet 5''x7'' (or any tape material of your choice) with both P99 and P99c grip shapes. Pictures show the final product for the P99 with...
Top