Hey all I have a Walther TPH made by inter arms. It is a strange one though, the serial is stamped in the barrel and also below the trigger guard. The stamp is very poorly done and I can’t seem to find anything about this if it was a regular occurrence or if I have something that’s a little...

Hello, I have got a Walther PPKS Interarms, but the gun doesn’t work very well because of some issues... first of all the barrel doesn’t stay blocked, open when I finish the bullets. I suspect that I should change the Ejector. The main problem is about the trigger ( or the hammer, I don’t know...

I just came into possession of a Post-war Walther PPKS. Hoping you all could confirm what I've put together (below) and possibly assist with additional info on its value, history, likely use. Here's what I think I have so far: Model: PPKS Serial: 162588 Caliber: 9mm Kurz/.380ACP Manufactured...

I just got an Interarms ranger PPK mfg 5/94. Went shooting today. The gun fires fine but when it fires the last round, the slide does not stop and remain open. It just closes with a cocked hammer. As I am new to a PPK, is this proper? Is there no slide stop on the last fired round to keep the...

I've been looking for awhile now for a nice PPK. Found it today for $500 at the Ft. Myers gun show. Nice Stainless Steel PPK (not PPK/s), 380, Interarms. Searching now for more info on the gun such as approximate mfg date (A075XXX). It appears somewhere between 1990-1995 based on some searches...

Hello all, Hopefully this message is in the correct forum. I have been trying to figure out the value of a Walther PPK/S chambered in .22LR with a standard blued barrel and frame that I would say is in very good condition. The grips are the black phenolic plastic type with undamaged...

Located a SS Interarms PPK in 32 with box , and papers, light scratches on barrel (look like from normal use) and red on safety is gone. Asking price is $1250. What say you all, is it worth it? Too much , is it a steal, just about right? Still hunting for one of these bad maama jamas as a pre...

Hey all, New to forum. Looking to buy Interarms SS PPK 32. All conditions / with or without box n papers etc considered. Post or feel free to PM. Thanks!

My '92/93 Interarms .380 PPK is about to hit 5000 rounds (in my hands), and I've had a few issues most likely related to a weakened recoil spring (mostly failure to return to battery). So, I need a replacement, and wondered how much success others have had with the 20# Wolff spring. My...

First off- hello everyone- long time lurker first time poster: Second: my local has an Interarms PPk .380 (US made) for $380 BUT the slide has patches of rust and pitting from where the previous owner carried it. The area of pitting is more than an inch long mostly near the front. The bore and...

If I posted this in the wrong place feel free to let me know. I have an Interarms stainless PPK that the ejector just broke. Brownells, Numrich, Ebay, and gunbroker are all zero...except one blued one. Anyone have any leads? I'm happy to PayPal a fair price, just looking for a replacement...

Greetings: I am new to this fantastic forum. Six months ago I made made my very first firearm purchase. I chose the PPQ M1. I am very happy that I allowed it to set the baseline and my expectations! I have now purchased a PPK/S .380ACP. It is a mid 90s Interarms, made in USA, pistol. I would...

The frame shown in the photo is from an Interarms PPK 380. We are trying to determine if the features circled in red (tabs) are common for this pistol or somewhat of a rarity. Can anyone provide information on this?

A Question About Interarms PPK .380 CCW Grips Hello All, Been debating about buying a PPK for months now for CCW. I've done my homework. God I would live a German original but can't spend $2.5K at the moment. And I hate the extended beavertail on the S&W (just a preference; I understand the...

I've looked everywhere, any and all forums and can't seem to find a dead on answer as to when and where my dream firearm that I just purchased was made. All the tables for serial numbers won't match. It is a Walther PPK/S 9mm kurz. On the left it has the standard Carl Walther stamping and Made...

I recently purchased a 1973 (?) Walther W. German PPK/S, serial #173XXX. Indicates Interarms on right slide. The frame # is the same but ends in a S (173XXXS). The sale description did not entirely explain that the pistol is in pristine condition or I might have not purchased it knowing I...

I am lucky enough to have found another interarms ppk which I really like, havent had the s&w versions got my first one 3 months ago had to sale, later and now getting one with original case, test target, 2 mags, cleaning rod etc. and am excited, many people say they arent worth much my last one...

I prefer without the pinky rest. (.380) If anyone can help me, I'll pay you what its worth. Just need a couple. Message me!! Thank you

EDIT: I found and purchased a PPK. No longer want to buy. Thanks I've been trying to buy a blued Walther PPK for about five months without success. Any idea where I can purchase one? I've checked my local gun stores, GunsAmerica, GunBrokers, and CheaperThanDirt. Desired specifications...