Walther Forums banner

ftf

  1. Periodic Failure To Feed (FTF)

    PP and TP Series
    I have a Walther PP 32, Manurhin, dating back to the 70's at least. Bought as 'used German Police' from Interarms. The problem I have always had is an occasional FTF, new round approximately 1/2 visible - push forward on the slide and it chambers. Read some time ago that a Wolff spring kit...
  2. Failure to Feed

    CCP
    New walther CCP my daughter in law bought. Around 300 rounds thru it and still issues with failure to feed. Thinking it might be her limp wristing, I fired it and had the same number of failures. Closer inspection noted that the round was hitting the exposed firing pin and stopping it from...
  3. Rapid Fire FTF in Q9

    PPQ
    Howdy all **Before I get scolded for posting this - when I search on the term FTF within the PPQ forum, I get ZERO results (Obviously something is wrong b/c I see that term in many posts)** With that said, I have an M2 PPQ9 that I bought brand new about 2 months ago. I have put about...
  4. OK - what do I do now?

    CCP
    I bought a CCP from an older gentleman who sold it to me for $400. He had purchased it a month before, for the lower recoil, for his wife but said she did not like it so he was selling. Because of all the talk on this forum I checked the serial number and it was greater than 15,000. I thought...
  5. Worst gun...

    CCP
    Bought this gun just before Christmas. Took it straight out of box to range. Gun FTF (slide stuck back and have to manually rack the slide back forward) on the second round and then every other round for first mag. Shooting 147 grain. Switched ammo to 115 gr and FTF about once per mag for next...
  6. Another FTF/No Primer Strike

    PPX
    Stopped hitting the primer in the middle of a range session. No amount of unscientific fiddling would fix it. Bought new. Approx 9 months & 2500 rounds. All "gentle" range time. All factory, FMJ ammo. No oil near the firing pin. Disappointed. j.e.b.
  7. PPS - Last Round FTF

    PPS
    Folks, Looking for some guidance. Recently purchased a new, well better stated unused (manufactured in 2009) PPS in .40 S&W. Love it! BUT.... went to the range and fired it for the 1st time. Loaded the 6 round magazine with 5 rounds, slow fired (at 15' covered a 3" circle). No issues. Release...
  8. Official PPQ Endurance & Reliability Thread

    PPQ
    For those who like to track reliability, let's share our milestones and some info about failures if any. Model: PPQ M2 Barrel length: 4" Caliber: 9mm Age: 28 days Round count: 1,000 FTF (feed): 0 FTE (extract): 0 Other failures...
  9. PK380 FTE, FTF Advice

    PK380
    I bought a used PK380 about a year ago used and absolutely love it! I like how it feels, shoots, loads, the fact that it is DA/SA and easy to de-**** among other things. My wife likes shooting as well. Unfortunately during range time I have had probably 3-4 FTE and 1-2 FTF events with several...
  10. FTF with Lellier & Bellot fmj 92 grs ammo

    PP and TP Series
    Hi -- I decided to do a little practice with my PPK/S at the range today. It's my concealed carry gun and I love it. I've had it for about 10 years now, and it has always performed perfectly. I sent it off to S&W a few years ago to do the recall, and got it back just as good as it was when I...
  11. Failure to Feed

    PPS
    I purchased my PPS 9mm last November as my summer carry. Up until last friday I had not problems with the weapon. Even went through a MAG-40 class with it! I've cycled ±500 rounds of 115gr FMJ and 200 rounds of Hornady TAP. I want to up performance my SD ammunition so I purchased Speer 124gr...
Top