WaltherForums

WaltherForums (https://www.waltherforums.com/forum/)
-   PPQ (https://www.waltherforums.com/forum/ppq/)
-   -   Surefire X300 or X400 w/PPQ (https://www.waltherforums.com/forum/ppq/18595-surefire-x300-x400-w-ppq.html)

No_regrets 11-07-2011 04:19 PM

Surefire X300 or X400 w/PPQ
 
Would anyone being able to share some photos of the PPQ with either the X300 or X400 mounted on it? I haven't been able to find any here nor on the internet.

Also, any user comments on how they fit and work out on the PPQ would be greatly appreciated!

Thank you.

No_regrets 11-22-2011 09:14 PM

Does anyone have any photos they could share of the PPQ with a Surefire mounted?
Or, how about one of the Viridian's .....C5L or X5L?

Thanks.

P1X4R 11-22-2011 09:55 PM

my X300 is usually mounted on my P220 but here's a few pics of it on the PPQ.

http://i1193.photobucket.com/albums/...s/P1050709.jpg
http://i1193.photobucket.com/albums/...s/P1050710.jpg
http://i1193.photobucket.com/albums/...s/P1050711.jpg
http://i1193.photobucket.com/albums/...s/P1050712.jpg

No_regrets 11-23-2011 01:25 AM


Thank you for taking the time to photogragh your PPQ with the X300 mounted. I really appreciate it!

May I ask how you feel it works on the PPQ? Is it easy to put on and take off? Do you feel it causes any problems in use, such as failure to feed or eject, etc.

Do you think the X400 would be the same experience?

Thank you so much for your help!

LittleRedDot 11-25-2011 08:22 AM

I'm gonna post some pics and a review of my X5L after breakfast

extremist 11-25-2011 01:25 PM

PPQ with X300 vs Streamlight TLR3
 
4 Attachment(s)
Got around to taking some pics today.

I like the size of the TLR3 but I really prefer the X300 for two reasons:

- Fits flush against the trigger guard
- Has momentary switch by pushing on the activator lever

I did play around with all of the adapters for the TLR3 and none of them will make the light fit flush with the trigger guard. I was not into taking a dremel to the adapters to make it fit flush. I'll let someone else experiment with that.

But the TLR3 is only $75 and the X300 is still $200+ :rolleyes:

Oh by the way, that's the new Walther 20 Round mag for the P99/PPQ :)

James

balance 11-25-2011 04:01 PM

Quote:

Oh by the way, that's the new Walther 20 Round mag for the P99/PPQ :)
Available from where? Earl's? How much? And does that notch on the mag that I see under the "PPQ" on frame stop the mag from getting too high in the magwell, and possibly hit the ejector?

That TLR-3 doesn't look like it could be moved any further rearward, even if the adapter was modified, as it looks like it would run out of room on the rail from that picture. I like my light to hit the trigger guard as well. I'd like to see that TLR-3 on a PPS if you have one available and it is possible.

No_regrets 11-25-2011 05:59 PM

Thank you Extremist for posting your photos of the two lights. I was surprised that the TRL3 didn't fit better. Seeing these photos will be very beneficial for many who do not have a store nearby that stock these.

Thank you for doing this for us all.

extremist 11-25-2011 06:16 PM

Quote:

Originally Posted by balance (Post 145091)
Available from where? Earl's? How much? And does that notch on the mag that I see under the "PPQ" on frame stop the mag from getting too high in the magwell, and possibly hit the ejector?

No I got them from Walther America/S&W. They should have them in stock.

That's what the "stop" plug does on the mag, it stops you from over-inserting the mag and damaging the ejector.

James

balance 11-25-2011 06:33 PM

Thank you extremist, I'll have to look into getting one of these.


All times are GMT -5. The time now is 09:22 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.