Possible new red dot mount option - WaltherForums
WaltherForums
 

Go Back   WaltherForums > Walther Firearms > P22

Reply
 
LinkBack Thread Tools Display Modes
Old 02-27-2019, 10:28 AM   #1
Junior Member
 
Join Date: Sep 2016
Posts: 4
Svensonjr .22
Possible new red dot mount option

So I found this company Outerimpact. They don’t make p22 adapter yet but they sent me these pictures. I thought 1917-1911m you might have fun seeing if any of the rear sight dove tails were the same size as p22. I think I read you said the p22 can cycle with the weight of Red dot on the slide no problem through tests you did. The pictures are the M&P kit on the PPQ
Svensonjr is offline   Reply With Quote
Register
Old 02-27-2019, 10:45 AM   #2
Junior Member
 
Join Date: Sep 2016
Posts: 4
Svensonjr .22
Never mind I just found posts that the P22 doesn’t have a dovetail. I should have looked in better light. Thanks 1917-1911 for bursting my bubble lol
Svensonjr is offline   Reply With Quote
Old 02-27-2019, 10:57 AM   #3
Senior Member
 
Join Date: Feb 2009
Location: Indian Springs, AL
Posts: 8,775
1917-1911M .38
Welcome Svensonjr, what you have pictured is the PPQ .22 which has an internal hammer, is a full size pistol and has a sight attachment system that is different from the one on the P22.

The P22 has a cast zinc slide that is very, very thin on the top. It is too thin to have a dovetail machined into it. The firing pin runs against the underside of it. The rear sight is fitted over an integral cast, threaded loop. An adjustable for windage only rear polymer sight fits over the loop and is held in place and adjusted by a screw. This screw is snapped into a small receiver on the left side of the sight so that when the screw is turned it pushes or pulls the sight left or right depending on direction of the screw's rotation.

Yes, I did attach up to 43 grams of weight to the original style slide and the pistol still cycled reliably. There is a limit though, a .22 only generates so much blow back energy.

The reflex red dots are light enough for the P22 to cycle...attaching one to the slide is the problem. None are made that will slip over the loop for attachment with the screw. Neither is the zinc top of the slide strong enough or thick enough to be threaded for attachment of a base plate with screws. We have explored drilling through the slide and into the mim'd steel breech block but that is a tedious process. Glue has not been a permanent solution in attaching a red dot base to the top of the slide.

So, while a small red dot looks pretty good on a P22, we have not come up with a good way to attach one. There will have to be an entirely different method of mounting a red dot as there is no dovetail, nor any manner of adding one. Thanks for the photo. I could suggest how such a sight might be attached to the P22 slide but the mount would be unique to the P22 only.



The rear sight attachment loop. It is threaded and an integral part of the cast zinc slide. 1917
1917-1911M is offline   Reply With Quote
 
Old 02-27-2019, 11:11 AM   #4
Junior Member
 
Join Date: Sep 2016
Posts: 4
Svensonjr .22
Thanks again for the help I’ll send that picture to them. But I doubt they would design something for something this unique.
Svensonjr is offline   Reply With Quote
Old 05-29-2019, 05:59 PM   #5
Junior Member
 
Join Date: Oct 2016
Location: Olathe, KS
Posts: 11
David1959 .22
Svensonjr, I looked at the Outer Impact website but they don't list an adapter for the Walther PPQ pistol. Did they say anything to you when they sent those pictures? Like "our xyz adapter will also fit the Walther PPQ .22 pistol." I'd be interested in getting one for my brand new PPQ .22 that I picked up yesterday!
David1959 is offline   Reply With Quote
Old 05-30-2019, 05:59 AM   #6
Junior Member
 
Join Date: Sep 2016
Posts: 4
Svensonjr .22
Yeah I looked at the email again and they said the customer used Smith& Wesson m&p mount holosun optic. And it worked great but they had not verified it yet.
Svensonjr is offline   Reply With Quote
Old 05-30-2019, 04:38 PM   #7
Junior Member
 
Join Date: Oct 2016
Location: Olathe, KS
Posts: 11
David1959 .22
Thank you! I will check them out.
David1959 is offline   Reply With Quote
Reply

Lower Navigation
Go Back   WaltherForums > Walther Firearms > P22

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.