Walther Forums banner

My new Walther PP Zella-Mehlis (Pre-WWII)

3K views 4 replies 2 participants last post by  Martin 
#1 ·
Hi Y'all. New user, long time reader. So I recently acquired a Pre WWII Walther PP Zella-Mehlis (Thur) chambered in 7.65 mm (AKA .32 acp). I'm guessing it was manufactured sometime during 1938, Serial #:107XXX P). It had the standard Crown/N on the right side of the frame and right above it on the barrel itself, visible thru the ejection port. Asides from that, there are no other post-manufacture engravings that should be present. Also, it seems that the safety block on the Walther was either removed or altered because the safety lever does not decock the hammer when switched. I will post as many photos as possible in hopes I can find out as much as possible about this relic's history/worth and why the safety lever/de-cocker doesn't work and how it can be fixed and/or what part/s I'll need. Looking forward to hearing from you guys and good luck!

Safe Shootin',

Hyphymikey
 

Attachments

See less See more
5
#5 · (Edited)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top