Tritium Sights for Creed - WaltherForums
WaltherForums
 

Go Back   WaltherForums > Walther Firearms > Creed

Reply
 
LinkBack Thread Tools Display Modes
Old 07-30-2019, 03:26 PM   #1
Junior Member
 
Join Date: Jul 2019
Posts: 1
Mike0357 .22
Good news guys. I took a gamble that paid off. I just finished installing Truglo tritium sights on my Creed. I bought front and rear sights that were listed for both P99 and PPQ. Using a sight pusher, I removed the rear sight from right to left (as you would sight the gun). It took a fair amount of pressure. I removed the front sight using a small flat blade screwdriver. The Truglo rear sight came with a hex set screw and the hex key. Again using the sight pusher, I installed the rear tritium sight. It went on fairly easy. Using a bit of red locking compound, I painted the set screw and hole and snugged it up. Finally, I installed the new front sight with a flat bladed screwdriver and applied red locking compound. I found that I needed to use the screw that came with the Truglo kit, rather than the original screw.
Good luck!
Attached Images
File Type: jpg IMG_20190730_214854_1564537844631.jpg (77.9 KB, 10 views)

Last edited by Mike0357; 07-30-2019 at 09:50 PM. Reason: Add photo
Mike0357 is offline   Reply With Quote
Register
Reply

Lower Navigation
Go Back   WaltherForums > Walther Firearms > Creed

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.