Need help - WaltherForums
WaltherForums
 

Go Back   WaltherForums > WaltherForums.com > Feedback, Comments and Issues

Reply
 
LinkBack Thread Tools Display Modes
Old 01-02-2017, 09:17 AM   #1
Junior Member
 
Join Date: Dec 2016
Posts: 1
2klicks .22
Need help

My son was cleaning my ccp to get to know it an ended up installing the locking pin in upside down can any one tell me if this is completely out of commission or can it be salvaged
Attached Images
File Type: jpg IMG_0682_1483362906847.JPG (465.1 KB, 20 views)
2klicks is offline   Reply With Quote
Register
Old 01-03-2017, 02:56 PM   #2
Member
 
Join Date: Sep 2015
Posts: 48
Quickshot .22
I've hesitated to respond but if I had let that happen I would first hit my kid over the head with it and then I would try to depress the locking mechanism about 1/4" into the slide and while depressed use a small screw driver to attempt to spin the mechanism to the correct position. Be careful to keep it depressed beyond the pin on right side so as not to damage the pin and far enough in to not engage the locking hook. Wow, hope that helps. If you are not mechanically inclined, send it back to the company store. Good luck! Quick p.s. use a small piece of dowel rod to depress the spring.
Quickshot is offline   Reply With Quote
Old 01-03-2017, 03:49 PM   #3
Supporting Member
 
Milspec's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 6,722
Milspec .38
Walther Arms Customer Support may be able to talk you through removing the slide. Here's their contact info: Customer Support - Walther Arms
__________________
Milspec

Last edited by Milspec; 01-03-2017 at 05:48 PM. Reason: Typo
Milspec is offline   Reply With Quote
Reply

Lower Navigation
Go Back   WaltherForums > WaltherForums.com > Feedback, Comments and Issues

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.